Specification: H10cm x W71cm

Strength: 3kg/6.6lb

Package content: 1set

Direction of use:

1. Make sure the surface is flat, smooth, clean and dry before application (Very Important!)
2. Remove the plastic film.
3. Estimate the length you need for the set. Paste 1 of the Paste-It first, insert the bar and paste another.
4. Aviod pasting on grout lines where possible.
5. For maximum strength, push out as much air from the center area & press firmly against the surface outwards to remove the air for all directions.

To reuse/change of location, simply peel off slowly from edge. Do not bend it. If the gel surface is dirty, wash it with running water to remove dirt. Let it dry before reuse.

Out of stock